Basic Info.
Display
12.1-Inch High-Brightness True-Color LCD Screen
Storage Mode
16g Electronic Hard Disk
Number of Receiving Channels
Six
Operation Mode
Touch Screen
Specification
340*270*73mm
Product Description
RSM-SY7 Ultra Sonic Pile Integrity Tester Model: RSM-SY7(F) Application- Acoustic pile tomography detection by transmission method
- Acoustic pile integrity detection by transmission method
- Concrete crack depth detection
- Concrete strength detection by ultrasonic-rebound combined method
- Longitudinal wave velocity test of rock mass in geological investigation
- Detection of loosen zone of tunnel rock mass
- Test of dynamic and elasticity parameters of non-metallic materials
- Integrity detection of underground diaphragm wall
Applicable standards- Standard Test Method for Integrity Testing of Concrete Deep Foundation by Ultrasonic Crosshole Testing ASTM D6760-08
- Technical Code for Detection of Building Foundation Pile JGJ 106-2014
- Dynamic Testing Technology Regulations on Highway Engineering Foundation Pile JTG/T F81-01-2004
- Nondestructive Detection Code for Railway Engineering Foundation Pile TB 10218-2008
- Technical Regulations on Concrete Strength Detection by Ultrasonic-Rebound Combined Method CECS 02:2005
- Technical Regulations on Concrete Defect Detection by Ultrasonic Method CECS 21:2000
- Regulations on Concrete Strength Detection of Railway Engineering Structure TB 10426-2004
- Detection Code for Building Foundation in Guangdong Province DBJ 15-60-2008
PrincipleThe objectives of the Ultra Sonic Pile Integrity Testing (RSM-SY7) are to determine the homogeneity and integrity of concrete between the probes. The data are used to confirm adequate concrete quality or identify zones of poor quality (due to inadequate vibration, segregation due to over vibration and/or improper concrete placement, washouts of cement due to groundwater flow, cracks due to shrinkage, contamination of the concrete, etc). If defects are detected, then further investigations should be made by excavation or coring the concrete as appropriate, or by other
testing methods.
Features1. International first four-channel self-transmitting and self-receiving pile profile full-combination ultrasonic detection is provided and a number of invention patent authorizations have been obtained;
2. Self-transmitting and self-receiving circuit design is provided and there is no need to replace the location of acoustic pipe corresponding to probe; the fully combined testing of four pipes and six profiles can be completed in a single lifting, the detection speed is improved significantly and the working strength of detection personnel at the field is greatly reduced;
3. The controllable adjustment gain of test waveform of each profile is delayed;
4. The location of the first wave can be searched automatically and the magnification can be adjusted automatically;
5. The 12.1-inch super-large true-color LCD screen is adopted, the test waveforms, wave trains, wave speeds, amplitudes and other information of 6 profiles can be clearly observed in the field at the same time and the whole pile quality in the testing process can be clear at a glance;
6. The shifting distance of testing point is adjustable within 1-50cm without leakage point and need of repeated testing;
7. The automatic counting and lifting device can be connected conveniently and quickly and the maximum lifting speed can reach 60 m/min;
8. Using the high-strength engineering plastic shell, the instrument is beautiful and durable with solid structure;
9. Imported connectors are used and the complete machine is equipped with waterproof design.
Core Advantages- First international patent
International first four-channel self-transmitting and self-receiving pile profile full-combination ultrasonic detection is provided and a number of invention patent authorizations have been obtained
- Completed fully combined testing of four pipes and six profiles in a single lifting
Self-transmitting and self-receiving design is provided, the detection speed is improved significantly, the location of the first wave can be searched automatically and the magnification can be adjusted automatically;
The test waveforms, wave trains, wave speeds, amplitudes and other information of 6 profiles can be clearly observed in the field at the same time and the whole pile quality in the testing process can be clear at a glance;
The shifting distance of testing point is adjustable within 1-50cm.
- Removable lithium battery
Long standby, support desktop charger; the battery can be easily changed and will work without interruption at the field.
Field testing SoftwareRSM-SY ultrasonic pile analysis software by transmission method1. The testing point waveform curve of main operation interface, wave train diagram of whole pile and profile depth curve are displayed with linkage
2. The wave train diagram, data table and gray-scale diagram are switched and displayed randomly
3. The display proportions of acoustic velocity depth curve, acoustic amplitude depth curve, PSD depth curve of profile can be adjusted randomly
4. The spectrogram of each testing point can be observed separately for ease of basic frequency analysis
5. Acoustic velocity and acoustic amplitude interpretation algorithm is accurate, and the acoustic velocity and acoustic amplitude can be interpreted individually
6. Support oblique detection and fan-shaped detection data analysis and processing
7. The automatic pipe correction function is owned and the data before and after the correction can be displayed at the same time
8. The output results have a variety of selection styles and combinations and can be compatible with multiple reporting formats.
9. The headers of output results can be customized for selection and the customized header template can be saved
10. The wave train diagram and depth curve diagram can be output on the single-page report paper at the same time
11. The picture output, print output, Word file output, Excel file output and other output modes are supported
12. Complete reports can be generated in batch
SpecificationModel | RSM-SY7(F) |
Master control form | Low power embedded system Basic frequency: 1GHz Memory: 512M |
Sampling method | Synchronous self-transmitting and self-receiving |
Display mode | 12.1-inch high-brightness true-color LCD screen |
Operation method | Touch screen |
Storage mode | 16G electronic hard disk |
Communication method | Built-in wired communication |
Depth counting method | Automatic counting |
Scanning speed | ≥20 cycles/sec |
Trigger method | Signal trigger |
Sampling interval | 0.1~200μS |
Recording length | 0.5~4k |
Transmit voltage | 500V/1000V adjustable |
Dynamic range | ≥100dB |
Gain accuracy | 0.5dB |
Number of channels | Four independent and controllable self-transmitting and self-receiving channels |
Number of profiles tested in a single lifting | Six profiles |
Transmit pulse width | 1-100μS continuously adjustable |
Frequency bandwidth | 1~500kHz |
Acoustic amplitude accuracy | ≤3% |
Acoustic time accuracy | ≤0.5% |
Receiving sensitivity | ≤10μV |
Intertrack crosstalk | ≤1/400 |
Data export | USB |
Data uploading mode | Wifi |
Operating temperature | -20~+55ºC |
Power supply mode | Removable lithium battery≥8h |
Dimensions | 340×270×73mm |
Weight | 2.0kg (including lithium battery) |
Lifting device |
Connection method of lifting device | Wired/wireless |
Wireless transmission distance | 30m |
Wireless working hours | ≥20h |
Minimum space between testing points | 1cm |
Maximum lifting speed | 60m/min |
Counting method | Double direction counting |
Standard ConfigurationNo. | Name | Quantity | Remarks |
1 | Host | 1 | |
2 | One-transmitting and one-receiving cross-hole probe | 4 | Optionally select four probes from these three types (50m/70m/100m) (including four wire coils) |
3 | Depth counter and connecting cable | 1 | Including 10m cable |
4 | Flat probe and connecting cable | 2 | 50KHz, including 5m calbe |
5 | pipe orifice pulleys | 4 | |
6 | Power adapter | 1 | |
7 | U disk | 1 | |
8 | Stylus pen | 1 | |
9 | Instrument and accessories container | 2 | |
10 | Tripod | 1 | |
Company Profile Wuhan Sinorock Technology Co.,Ltd
Wuhan Sinorock Technology Co., Ltd. established on August 8, 2008, is a joint-stock high-tech enterprise directly under the Institute of Rock and Soil Mechanics of Chinese Academy of Sciences. It was built based on the former Department of Intelligent Instrument of the Institute of Rock and Soil Mechanics of Chinese Academy of Sciences, and has developed the brand RSM for over three decades. The company integrates product innovation and market development and focuses on the research, product development, production and promotion and application of geotechnical engineering intelligent detection methods, supporting instruments and remote expert systems. RSM has become a leading brand of geotechnical engineering testing instruments at home and abroad.
Our products rank first in the domestic market and have been exported to many countries, such as Thailand, Malaysia, Singapore, Algeria, United Arab Emirates, Turkey, Indonesia,Iraq,India and other countries.
Marketing & servicesWe have been providing professional products and services for our customers for more than 30 years.
We pay attention to every link of the product, including R&D, procurement, production, quality and maintenance.
Our sales volume has increased sharply year by year, the number of domestic customers has reached more than 18,000, and the domestic market share is more than 50%.
RSM series products are exported to overseas markets.Quality InspectionSinorock has passed ISO certification and SGS certification. We have strict product quality inspection process, established quality department and quality group, from raw material testing, semi-finished product testing, finished product testing, and outbound inspection to ensure product quality.
Application fieldTesting Equipment Expert on Geotechnical Engineering-SINOROCK Since1985Widely Used in the Following Scenarios
Packing & DeliveryFAQQ: Are your company a trading one or a factory?
A: Factory+ trade (integration), More than 10 years focusing on test instruments field.
Q: After an order is placed, when to deliver?
A: Generally about 7days, Please be aware that our production lead times depend on specific items and item quantities.
Q: What about the warranty with after-sales services?
A: The testing machine is guaranteed for 12 months, we can help you to repair your problem con troller freely, After the warranty, the professional after-sale service team will provide perfect technical support and help guests solve problems encountered while using our product, handles guest problems and complaints in a professional and timely.
Q: What about the product' services and qualit?
A: Each instruments must be carried out 100% quality examination and test when shipping and delivery goods Product use training, each of our product provide video training to show you how to install operate We can arrange engineer to train the operation of equipment to customer s company when you need. products are widely recognized and trusted by users.Contact us
Address:
No. 163, National Avenue, Hongshan District, Wuhan, Hubei, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Apparel & Accessories, Construction & Decoration, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Security & Protection, Service, Tools & Hardware, Transportation
Management System Certification:
ISO 9001
Company Introduction:
Wuhan Sinorock Technology Co., Ltd (Sinorock) is an R&D hi-tech enterprise of direct-holdings in cooperation with Institute of Rock and Soil Mechanics (IRSM), Chinese Academy of Sciences (CAS). The foundation of Sinorock is based on the scientific and technological achievements made by Intelligent Instrument Lab, which was originally under the control of IRSM. On January 9th, 2011, granted by SASAC,
Wuhan RSM Intelligence Geotechnical Co., Ltd was merged into Sinorock as a wholly owned subsidiary. With extended capital to 10 million CNY, Sinorock takes full advantage of the resources and channels supported by IRSM in technology realm, sharing the partnership with several geotechnical engineering and testing companies of CAS to form the one-stop industrial chain of processing and producing.
Being widely recognized with dominant position of product innovation and market development, Sinorock is dedicated to offering a set of solution from intelligent testing system with compatible equipment to product promotion and further application service. It′s worth mentioning that Sinorock is in the position to participate in the editing of the industry norms and standards. Moreover, Sinorock enjoys a high reputation overseas in the field of geotechnical engineering.
As the wholly owned subsidiary of Sinorock, RSM Intelligence Geotechnical Corporation devotes itself to develop and promote the safety monitoring system in construction. It is committed to the realm of environment, urban geology and geological disasters. Also, the company is able to provide a package service of equipment use, engineering consulting and data processing. Most remarkably, the company shows strong will to be the incubator of innovative technology by manufacturing outstanding products with advanced patents to the market!